If your iPad Pro volume buttons are not working, this article is for you! Keep reading as I show you all possible fixes.
Your iPad Pro volume buttons may not be working for various reasons. It could be either due to physical damage or software issues. Here are all the steps you need to take if your iPad Pro volume buttons are stuck or not working.
A broken volume button is often unexpected and can be annoying to deal with. After all, we don’t realize how much we use it until we can’t use it anymore. Not being able to turn your volume down if an annoying video plays or if your song is too loud can also be embarrassing.
Before running through the solutions to fix the iPad Pro volume key stuck or not working issue, let’s first briefly check out the possible causes! Then, we have listed the 11 best tips and workaround for this common iPad issue.
What Could Cause the iPad Pro Volume Buttons to Stop Working?
Even though hardware failure is the first thing that comes to mind when the volume buttons of the iPad Pro become unresponsive or stop working, you should not jump the gun and visit an Apple Store straightaway. Things like dust pile up, the pronounced but unresponsive buttons of your case, a rare software bug, or an outdated version of the software could also be causing the issue. So, we will look into each possible cause and try out solutions accordingly.
Along the way, we will also explain some reliable workarounds to let you control the volume on your iPad Pro without having to use the physical volume buttons. With that in mind, check out these possible fixes for the iPad Pro volume button issue at hand.
11 Tips to Fix iPad Pro Volume Buttons Not Working Issue (2022)
1. Make Sure Your iPad’s Volume Buttons Are Enabled
Some might not be aware of this, but there is a setting that turns your iPad’s volume buttons on and off. This setting is already enabled by default on all devices, but it’s possible someone can turn it off without realizing it.
To check this, head to Settings > Sounds & Haptics and enable Change with Buttons. If this isn’t enabled, this is why your iPad Pro volume buttons aren’t working. If it’s already enabled, proceed to the next fix.
2. Remove Your iPad Case
Believe it not, there are several cases (especially the cheaper and rugged ones) that lack tactile buttons. So, if you have installed a case on your iPad Pro, remove it and press the volume buttons to check if they are working or not. If the volume buttons are working fine, your case was the culprit and not your iPad hardware.
3. Are the Buttons Stuck? Try Cleaning Them Using Alcohol
We use our iPads so much that dirt and grime can sometimes get under the buttons, especially if you aren’t using a case. Press down on your buttons a few times to check if your buttons are stuck. If they’re stuck or don’t seem to click down, you might need to clean them.
To clean your buttons, take a cotton swab and dip it in isopropyl alcohol. The best option for cleaning electronics is 99 percent isopropyl alcohol as it dries quickly and doesn’t contain much water. It also removes dirt and grime by breaking up oils.
Use the cotton swab to clean around your volume button the best you can. If you can push down on the buttons, doing so might help you clean it better. There’s no need to overdo it with the alcohol, as it doesn’t take much to work.
After cleaning, wait 15 minutes for the alcohol to dry. If your volume buttons are working now, great! If they are only working a bit better, that’s a sign that they were dirty and you should keep cleaning them. If still they aren’t working at all, you might want to move on to the next fix.
4. Update Your iPad to the Latest Version of iPadOS
While updating your iPad can sometimes cause a problem with your volume buttons, not updating can also cause problems. as a result.
There’s also a possibility that a previous Apple update you installed is buggy, and updating again could fix the problem.
To be safe, try updating your device to see if this works. You can update your device by going to Settings > General > Software Update. Here, you can see if a new update is available or if your device is up to date.
5. Reset or Restore Your iPad
Sometimes, firmware updates can change how the buttons on our iPads work. If you recently updated your iPad Pro and the volume buttons stopped working, try restarting your device by turning it off and on again.
If this doesn’t work and you did recently update your phone, you might need to reset your device. This means backing up your iPad and erasing all the content settings. A full reset might also work if your volume button stopped working after an app download or a jailbreak attempt.
To do this, first, you’ll need to back up your device. Then you will go to Settings > General > Transfer or Reset iPad > Erase All Content and Settings.
This will wipe your iPad clean and essentially make it like new. Before restoring a backup, go into the device and test the volume buttons. If they work, restore your backup.
There are some cases where restoring your backup might make them not work again. If that’s the case, it might have been an app you tried to download or your backup could be corrupted. Sadly, this means starting from scratch, unless you have an older backup you can try restoring.
If your photos and contacts are in iCloud you won’t need to transfer those over manually.
6. Control Your iPad’s Volume Without Using Volume Buttons.
If you use apps like Spotify, you can control the volume within the app without a physical button. If all else fails, there are still ways to control your volume without using the buttons. The easiest way is to use the Control Center.
By swiping down from the top-right corner of your screen., you can open the Control Center and adjust your volume. If you have AirPods, you can still tap your AirPods to raise or lower volume without the need for a volume button. Other Bluetooth headphones can control volume as well. This means that you won’t have to keep going to your iPad when you want to change the volume.
7. Control the Volume With AssistiveTouch
If you are looking for another way to control the volume on iPad Pro without using volume buttons, consider using AssistiveTouch. You can set the AssistiveTouch button to open a menu to control your volume on screen or have it either turn up or down when tapped.
To use it, go to Settings > Accessibility > Touch > AssistiveTouch. Here, you can set your device to turn the volume down with one tap and turn it up it with two.
8. Getting Your Volume Buttons Repaired
None of the solutions above helped fix the volume buttons not working issue on your iPad Pro? Well, if the volume keys on your iPad Pro are still unresponsive, it might be a hardware issue. It would be wise to contact Apple Support without any delay to get the issue resolved. Some hardware components might be broken or damaged, hence, a timely hardware repair will help you fix the problem.
Fixed iPad Pro volume buttons not working
Hopefully, the solutions mentioned above will fix your iPad Pro volume buttons in most cases, and you’ll be able to change your volume again in no time. By the way, let us know the trick that helped you fix the ill-functioning volume buttons. And if you have any trusted solutions missing from this guide, drop a comment and let us know.