Is your iphone 13 Pro Max not turning on? In this article, I’ll tell you exactly why your iPhone 13 Pro Max won’t turn on and exactly how to fix it.
If you’ve ever asked yourself, ’’why won’t my iPhone 13 Pro Max turn on?’’ you’re not alone. Even if you’re a professional iPhone tinkerer, things could occasionally go beyond your skill level and you may find yourself wondering what to do with an iPhone 13 Pro Max that won’t turn on. Today we’ll take a look at a few reasons why your iPhone 13 Pro Max won’t turn on and also look at a few fixes for the same. Lets get started.
Why Is My iPhone 13 Pro Max Not Turning On?
It can be stressful to find your iPhone 13 Pro Max does not turn on! The good news is that it is usually not difficult to narrow down the problem and get your device working again. For the most part, when your iPhone 13 Pro Max won’t turn on, the problem falls into one of these three categories:
- A software bug is causing problems and preventing your iPhone 13 Pro Max screen from waking.
- Your iPhone 13 Pro Max battery is dead because of a charging issue with your cable, charger, or outlet.
- Your iPhone 13 Pro Max has a hardware issue, which is most often caused by drop damage or water damage.
Below, we’ll walk through each potential issue to help get your iPhone 13 Pro Max working again.
Here’s what to do if your iPhone 13 Pro Max won’t turn on
1. Is it plugged in?
Just kidding – but seriously, when was the last time you charged it? Sometimes time flies when you’re having fun watching cat videos and the next time you pick your iPhone 13 Pro Max up it won’t turn on because you’ve YouTubed it to death. Grab a power supply and make sure you actually have some juice on your iPhone before we proceed. Remember, sometimes you need to charge for a few minutes before your iPhone can power itself on.
2. Is it on but the screen isn’t on?
This is the next possibility, the iPhone 13 Pro Max is actually on but the display isn’t working. The easiest way to check this is to force it to shut off and back on.
- Press and quickly release the Volume Up button.
- Press and quickly release the Volume Down button.
- Press and hold the Side button until you see the Apple Logo.
3. Did you drop it or get it wet?
This is one of the most common reasons an iPhone 13 Pro Max won’t turn on. If you’ve recently dropped your phone or it has gotten wet, you might have some issues. Trying to turn a wet iPhone on too soon can short circuit your phone and fry it,
To put things succinctly, if you dropped your iPhone 13 Pro Max in water and it won’t turn on, you’re going to need to take it in for repair as you most likely have a hardware problem or a damaged display.
4. Did it gradually get buggy and then die?
If you started to notice some weirdness, like crashes, restarts, or other things that shouldn’t happen in the lead-up to your phone no longer turning on, you might just have a software issue that can be fixed by replacing the firmware.
You can also try a factory reset to clear up any other problems. If this sounds too complicated, take it to your nearest Apple Store for assistance.
5. Is your battery bloated or leaking?
Another rather obvious reason your iPhone might not turn on is because the battery has simply given up the ghost permanently. This usually happens gradually over time, but it can occasionally happen suddenly, especially if your battery is bloated or leaking. If you have AppleCare , make a Genius Bar appointment at the Apple Store to set up a battery replacement.
6. Is your charger or cable kaput?
Sometimes you’re left wondering why isn’t my iPhone 13 Pro Max turning on and it turns out that the phone isn’t the culprit at all. There have been occasions even the smartest of people have not identified that the issue is because of a faulty charger cable, adapter, or even a wall socket. So make sure you try a different lightening cable, different power adapter (if you have one), and another power outlet in your home before you know you can definitely blame your phone.
7. Are you just seeing the logo screen?
If your iPhone 13 Pro Max will actually turn on but won’t go past the boot screen, this is what we call a boot loop. It generally means your phone will start as normal but just get stuck forever on the logo screen.
If you’ve recently updated to a new version of iOS it might be as simple a solution as entering Recovery mode.
To put iPhone 13 Pro Max into recovery mode, you must connect your iPhone 13 to a computer with a Lightning to USB cable. Next, do the following steps in quick succession:
Step 1: Press Volume up and release.
Step 2: Press Volume down and release.
Step 3: Press and continue to hold the Side button until the connect to computer glyph appears on your iPhone 13’s display.
If connected to a Mac, you should see a Finder window stating that your iPhone has been placed into recovery mode. macOS will then give you an option to either Update to the latest version of iOS, keeping your data, or to Restore iOS, which will perform a fresh and clean install of the latest version of iOS. Select Restore and follow the onscreen instructions.
8. When All Else Fails, Contact Apple Support
If you’ve tried the solutions above, and your iPhone 13 Pro Max will not turn on, it may have a hardware failure. At this point, your best chance to get your device working is to locate the nearest Apple Store. Apple store employees can help determine what the underlying issue is with your iPhone. If you don’t have an Apple Store nearby, you can also contact Apple for support and service.
iPhone 13 Pro Max not turning on? Fixed!
That’s pretty much it on how to fix the problem of the iPhone 13 Pro Max not turning on. Have these tips helped you? Any other tips to fix an iPhone 13 Pro Max that won’t turn on? Drop a comment and let us know.